PSB DRAIN PUMP

OVERVIEW

This type of drain pump is mainly used in indoor unit of floor standing air conditioner and ceiling-mounted air conditioner. It can discharge condenser water produced by the evaporator in the process of refrigeration and dehumidification. It can work under two kinds of frequency (50/60 Hz). And it has many advantages: high efficiency, low noise, low libration, light weight, small size and energy saving, etc.The shaded-pole motor drives the centrifugal impeller from the pump part running. The liquid comes from the inlet and goes out of the outlet by the force of centrifugal strength of impeller and atmospheric pressure, and it can be discharged to a certain height.

SPECIFICATIONS:

NO  ITEM TECHNICAL PARAMETER
PSB-12 > PSB-7
1 Rated Voltage  AC220V~240V,50Hz/60Hz
2 Rated Current <150mA
3 Input Power <13W
4 Electromotor type            Single-phase and bipolar, Insulation Degree E
5 Max. Flow rate 400ml 500ml
6 Lift 1200mm 700mm
7 Operation Temperature -10℃~+40℃; <RH95% 
8 Storage Temperature -20℃~+70℃
9 Insulated resistance >100MΩ
10 Dielectric strength 1500V,1min,
11 Endurance 100,000 cycles
12 Fix Method Keep the motor part up, and tilt should be within 10°.
13 Using Liquid Condenser water (or Tap water), 0℃~+35℃, No freeze.